Magnetic field molding press

1 protection release: refers to the demolding process head has constant pressure acting on the workpiece (pressure according to the size, shape of the workpiece, which can ensure the adjustment) parallel cracking, the workpiece in the high density molding stratification, off angle tend to greatly reduce the density of up to 4.2-4.4g/cm3. The box, cylinder 4.0-4.2g/cm3.

2 sizing press: the size of workpiece forming is not only connected with the feeding quantity and pressure, and the particle size, the amount of lubricant. Sizing press is a very good solution to the same size, raise the yield of problems. To suppress the size deviation less than 0.1mm

3 constant current (when the grid voltage fluctuation, temperature changes and other power supply automatic correction, guarantee not to appear louqu to and weak magnetic), phase lack protection, overcurrent protection, phase sequence identification functions.

The 4 frame floating magnetic field press is improved based on two-way frame type magnetic field press on. In addition to floating molding and added peristaltic demoulding and accurate positioning function. Can improve the uniformity of the magnet; the finished product rate is improved and the yield; easy to seal. Suitable for mass production of neodymium iron boron.